COMBINATION HAMMER

An Efficient 1 100 W combi hammer for SDS-MAX blades. Masonry drilling capacity of 40 mm and impact energy of 8.3 J. With its drilling and chipping functions, this tool is an ideal choice for renovation and building work.

FEATURES:
o Powerful 11 AMP motor delivers 8.4 ft.lbs. of impact energy to handle the most demanding applications
o Anti-Vibration Technology (AVT(R)) is a synchronized, three-component system that more effectively reduces vibration resulting in a low 5m/s2
o Air actuated counterbalance directs air pressure from the crank and barrel room into the counterbalance cylinders to move counterweight pistons in the opposite direction of the drive piston actively reducing vibration
o Vibration absorbing housing features a spring loaded main handle and upper housing that move independently of the motor and drive mechanism effectively isolating most of the vibration away from the user
o Integrated damper spring at the base of the impact bolt is engineered to absorb impact vibrations from the drill bit
o Lock-on or trigger activation in "Chipping Only" mode with a push button start/stop control for more convenient operation
o Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
o Soft start suppresses start-up reaction for more control and better accuracy
o L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
o L.E.D. power light indicates switch failure or cord damage
o Variable speed control dial enables user to match the speed to the application for greater versatility
o Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
o Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling
o Automatic brush cut-off protects commutator from damage for longer tool life
o 2-mode operation for "Chipping Only" or "Hammering with Rotation"
o 24 bit angle settings allow the bit to be set at different positions for operating convenience
o One-touch sliding chuck for quick bit changes

Features

Powerful 1,510 W motor delivers 19.1 J of impact energy to handle the most demanding applications
Lock-on or trigger activation in "Chipping Only" mode with a push button start/stop control
Soft start suppresses start-up reaction for more control and better accuracy
Depth gauge for increased drilling consistency
LED power light indicates switch failure or cord damage

Makita JN1601 Includes

Wrench (781028-4)
Hex Wrench (783208-8)

Makita JN1601 Features

Clean and precise work in keystone plate, deck plate and other corrugated sheet materials
Die rotates 360?
Large 1/4" stroke
Ergonomic, slim body design for easy gripping
Extremely light (weighs only 3.6 lbs.) for easy handling
Lock-on sliding switch for continuous operation
Built-in thickness gauge for convenience
Easy punch and die replacement for reduced down time
Double insulated

Makita Reciprocating Saw (model JR3051T) delivers superior power and performance with less vibration. The JR3051T is powered by a 12 AMP motor with electronic speed control to maintain constant speed under load. The JR3051T has a long 1-3/160 stroke for faster cutting with 0-3,000 strokes per minute (SPM) and a variable speed trigger to match the speed of the saw to the application.

The JR3051T has a durable body design that keeps dust and debris away from the motor, with rubber and felt seals to keep dust and water out for a longer tool life. The JR3051T weighs 7.3 lbs., with tool-less blade change.

The JR3051T is a versatile and powerful reciprocating saw engineered for demolition, metal cutting, wood cutting, drywall and plaster, plastics and remodeling. It0s ideal for builders, roofers, metal fabricators, remodelers, and general contractors seeking a best-in-class industrial quality reciprocating saw.

Planers 6.5 amp-3-1/4 inch High power-to-weight ratio, two-blade cutter head, equipped with double edge carbide blades, easy blade setting system, machined aluminum base, rigid die-cast aluminum housing with all ball bearing construction,machined aluminum and balanced planer drum, lock on button, depth adjustment knob with easy to read scale, rubberized front and rear handles, spring-loaded stand, poly-v belt, double insulated. Specs: 3- 1/4 inches planing width, 3/32 inches planing depth, no load RPM 17,000, size (LxWxH) 11- 1/4 inches x6- 1/4 inches x6- 1/8 inches, weighs 5.7 pounds.

POWER : Powerful 15 AMP motor
delivers 3,800 RPM for superior
performance
CONVENIENCE : Adjustable spark
guard designed to divert sparks
PRECISION : Fence adjustment up
to 450; adjusts to 3 locations
for various material
sizes
CAPACITY : Large cutting
capacity; cuts up to 5" round
and 4" x 7-5/8" rectangular
INCLUDES : Abrasive wheel,
wrench

1,206Wh capacity with a 33.5Ah lithium-ion battery for extended tool runtime.
Compatible with Makita 18V X2 LXT, 40V XGT, and direct-connect tools
Adjustable and removable harness for backpack or stationary use.
4-LED fuel gauge for monitoring battery charge levels.
Adapters Available Seperately

MAKITA COMBINATION KIT

Makita polishers are preferred by automotive detailers and marine enthusiasts, and the 5" Dual Action Random Orbit Polisher (PO5000C) is packed with enhanced features for consistent performance, job after job. The dual action control offers "random orbit with forced rotation" or "random orbit with free rotation", and the variable speed control dial has five speed settings so users are able to set the speed and action to the application. Additional performance features include an electronic controller that automatically applies additional power to maintain constant speed, even under load, and also provides soft start for smoother start-ups and longer gear life. For added convenience the Polisher has an ergonomic knob handle and rubberized back handle with lock-on switch, and a rubberized tool rest for upside-down placement of the tool. It is ideal for commercial-duty polishing applications.

Includes:

1/2" Collet (763643-6) 1/4"
Collet (193214-9)
2 ea. Wrench (193234-3)

Features:

0 Powerful 11.0 AMP motor delivers 8,000-24,000 RPM for the most demanding applications
0 Variable speed control dial enables user to match the speed to the application
0 Electronic speed control maintains constant speed under load
0 Soft start feature for smooth start-ups
0 Low noise (81dB) and low vibration for operator comfort
0 Rugged aluminum motor housing with small 3-1/4" diameter for easy
handling
0 Sub base accepts industry standard template guides for convenience
0 Durable flat top design for stability when changing bits
0 Industrial cam-lock for fast and easy depth adjustment and removal of motor
0 Bits are installed/removed with two identical size wrenches
0 All-ball bearing construction for longer tool life
0 Large calibrated depth control ring for easy depth adjustment
0 Externally accessible brushes for greater serviceability
0 Accepts 1/2" and 1/4" shank bits

Makita RP2301FC Features

Powerful 15.0 AMP motor delivers 9,000-22,000 RPM for smooth routing
0" - 2-3/4" plunge depth capacity for easy penetration into work piece
Electronic speed control maintains constant speed under load
Variable speed control dial enables user to match the speed to the application
Soft start feature for smooth start-ups
Electric brake for increased productivity
Linear ball bearings for smooth plunge action and superior performance
Quick release plunge depth adjustment with micro control along with 3 preset depth stops for added precision
Built-in twin L.E.D. lights illuminate the work area for increased visibility
Oversized ball bearing construction for longer tool life
Ergonomic rubberized handles with built-in large two-finger switch for added control and use
Conveniently located plunge lock lever for efficient operation
Shaft lock for quick and easy bit changes
"Tool-less" template guide system for quick and easy installation and removal
Lock-on trigger switch for continuous operation
Built in fan with labyrinth construction minimizes dust from entering the tool for longer tool life
Easy-to-read depth scales
Chip deflector engineered to direct chips away from the operator

MAKITA PLUNGE CUT SAW 165MM

With bright double LED
With brushless motor for low power consumption
XPT - Extreme Protection Technology. Optimum protection against dust and splashes of water, even under harsh conditions